RCX 20A ESC Brushless Motor Speed Controller (Programmable / DYS)
zoom_out_map
chevron_left chevron_right
-$5.00

RCX 20A ESC Brushless Motor Speed Controller (Programmable / DYS)

$8.99 No tax

$8.99 Tax excluded

$13.99 - $5.00

notifications_active Last items in stock

Same HobbyWing program for Airplane and Helicopter.

Programmable Features
  1. Brake Setting:Enabled / Disabled, default is Disabled
  2. Battery Type:Li-xx(Li-ion or Li-poly) / Ni-xx(NiMH or NiCd),default is Li-xx.
  3. Low Voltage Protection Mode(Cut-Off Mode): Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off.                                                           
  4. Low Voltage Protection Threshold(Cut-Off Threshold):Low / Medium / High, default is Medium.
    1. For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V.
    2. For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells NiMH battery, fully charged voltage is 1.44*6=8.64V, when “Medium” cut-off threshold is set, the cut-off voltage will be:8.64*50%=4.3V。
  5. Startup Mode:Normal /Soft /Super-Soft, default is Normal.
    Normal is preferred for fixed-wing aircraft. Soft or Super-soft are preferred for helicopters. The initial acceleration of the Soft and Super-Soft modes are slower in comparison, usually taking 1 second for Soft startup or 2 seconds for Super-Soft startup from initial throttle advance to full throttle. If the throttle is closed (throttle stick moved to bottom) and opened again (throttle stick moved to top) within 3 seconds of the initial startup, the restart-up will be temporarily changed to normal mode to get rid of the chances of a crash caused by slow throttle response. This special design is very suitable for aerobatic flight when quick throttle response is needed.
  6. Timing:Low / Medium / High, default is Low.
    Usually, low timing value can be used for most motors. We recommend the Low timing value for 2 poles motor and Medium timing value for motors with more than 6 poles to get a high efficiency. For higher speed, High timing value can be chosen.
Specification
  • Continuous Current: 20A
  • Burst Current: 25A
  • Input Voltage: Lipo 2-4 Cells
  • Input Voltage: NiMH NiCd 6-16.8V
  • BEC: 5V  2A
  • Size:  36mm (L) * 26mm (W) * 7mm (H)
  • AWG Cable: 16#
  • Weight: 22g
  • MCU: Atmega
  • Suitable SimonK Firmware: tgy.hex (if you want to flash it by yourself)
  • Download PDF English Manual
Designed for
  • Airplane and Helicopter
Package includes:
  • 1 x RCX 20A ESC Brushless Motor Speed Controller (Programmable / G Series)


RCX07-031
35g
chat Comments (0)