RCX S9257 High Speed Digital Servo (4.5kg / 0.07sec / Tail & Swashplate Servo)
zoom_out_map
chevron_left chevron_right
-€8.13

RCX S9257 High Speed Digital Servo (4.5kg / 0.07sec / Tail & Swashplate Servo)

€5.43 No tax

€5.43 Tax excluded

€13.56 - €8.13

notifications_active Last items in stock




RCX S9257 is a high speed, high torque digital servo suitable for 450 & 500 series helicopters. It is an excellent tail locking servo for 3D flight. It could also be used as a Swashplate Servo for larger helicopters (eg. 500 / 600 size helicopters).

Equipped with two ball bearings.

For use with the Futaba GY401 (FUTM0807, FUTM0808) and the GY502 gyros.

Does not work with these Futaba radios (4FG, 5FG/K, 6FG, 6FG/K, 7FG/K New Terratop, 3EGX, 3PGE, 2NL, 2LGX, 2FR, 2PK series) These radios have a servo neutral signal of 1310us not compatible with this servo.

Do not use with AM radios.

Specification
  • Dead band: 0.002ms (Default)
  • Control System: +Pulse Width Control
  • Working Frequence: 1520μs / 80hz Digital mode/Analogy mode
  • (RX) Required Pulse: 3.0~5.0 Volt Peak to Peak Square Wave
  • Operating Voltage: 4.8~6.0 Volts DC
  • Operating Temperature Range: -10 to + 60 Degree C
  • Operating Speed (4.8V): 0.08 sec/60° degrees at no load
  • Operating Speed (6.0V): 0.07 sec/60° degrees at no load
  • Stall Torque (4.8V): 4.0 kg.cm
  • Stall Torque (6.0V): 4.5 kg.cm
  • 360° Modifiable: NO
  • Motor Type: Coreless Motor
  • Potentiometer Drive: Indirect Drive
  • Driver Type: FET
  • Bearing Type: Dual Ball Bearings
  • Gear Type: Plastic Gear
  • Programmable: YES
  • Connector Wire Length: 18.0
  • Dimensions: 35.5mm x 15.0 x 28.6mm
  • Gear: 25T
  • Weight: 25g

Package Included
  • 1 X RCX S9257 High Speed Digital Servo (4.5kg / 0.07sec / Tail & Swashplate Servo)
  • 1 X Set of Servo Arm
RCX07-006
18g
chat Comments (0)