This is the new version of WASP V3 with 2.4GHz Radio System.

This new SKYARTEC's 7CH WASP V3 Pro is concepted to be a high performance, ease of control, stable, durable, and lightweight helicopter. The WASP V3 adopts PPM control system with tail rotor andBelt driven system, professional gypo, which ensure the helicopter react fast on any kind of 3D acrobatic flying courses. Furthermore, the WASP V3 is equiped with the latest radio control set with high performance4500KV Brushless Motor , Brushless ESC, and Li-Po Batttery. The WASP V3 is the perfect choice for both the beginners and experts due to its compact size, stability, and agility. Also, the WASP V3 is best for flying in both indoor and outdoor as the CP rotor head allows quick response on control inputs and copes easily with windy outdoor conditions.

This model is designed with German know-how. It can be flown easily near the ground, and is highly damage-resistant. It has been designed to allow people to learn to fly before moving to the next very expensive models. The WASP V3's light and handy design fits for the beginners due to small body and good stability. Expert pilots will also enjoy this model however, because it can be operated in small rooms, garages etc.

2.4GHz 7 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE) New radio control set High performance4500KV Outrunner Brushless Motor used as the main drive and makes the flight much stable and better performance.

• Can fly in skyway, backward, and 3D aerobatic
  
• PPM mixing control system and collective pitch structure
  
• 120 degree PPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter and weight is greatly reduced
  
• Improved blades give superior lift. Their pop off design gives extra protection in case of heavy landing
  
• Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds
  
• The autorotation landing system, made of high quality one-way bearing, maximally protects your helicopter from damage
  
• Hard, Light weight ABS Blades
  
• Brand new design for the structure
  
• Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance of flying
  
• Tail rotor driven by belt provide stable flight and low noise
  
• NO TAIL Motor - Tail Rotor driven by Belt with Servo Controlled Rudder like Gas-Helicopter
  
• No need to worry about burning tail motors
  
• Outer placed Head Lock Gyro
  
• 7.4V 900mAh high capacitance Li-Po battery provide enough power for any aerobatic flight
  
• With length-adjustable servo push-rod, precision sub trim can be easily set
  
• Separate main shaft and main gear reduce repair time and noise
  
• Weight is a key to a EP helicopter, lightened skid set, main gear, main frame and canopy reduce the load of whole helicopter
  
• Easy to fly and more stable lifting
  
• PPM receiving and transmitting system increases the operation stability
  
• PPM mode with adjustable pitch system and 3D conversion
  
• Provide excellent performance outdoor and indoor
  
• Tail blade adopt flameout landing system
  
• Newly Designed Rotor Head gives better control
  
• Pre position servo mounts have been added in this helicopter, servos can be mounted solidly by screw and easy to install
  
• Extreme smooth control and stable flight
  
• Precise controlling and hovering
  
• Digital Proportional Motor Speed Control
  
• Suitable for Indoor/Outdoor/Backyard/Stadium
  
• Using the Ultra tough Aluminum Alloy materials, the Helicopter does have very strong structure.
  
• In addition, the main rotor blades are using top quality special ABS Blades (inside)and the surface with the 3K material , which is
  
• extremely light and not easily break
  
• Approximately 15 minutes flight time on each charge - 7Optional Li- poly battery will help to achieve better performance and longer flight time.
  
• Best choice for Beginner - Advanced hobbyist
  
• All spare parts and accessories are available Complete Kit, Ready to Fly (Everything is included and 100% assembled -- 8 AA batteries for the transmitter not included)
  

• Main Rotor Diameter: 475mm
  
• Length: 450mm
  
• Flying Weight: 293g (Battery Included)
  
• Driven system: Skyartec 4500KV Brushless Motor
  
• Gyro: Skyartec Head Lock Gyro
  
• Servo: 3 x Skyartec 8g,1 x Skyartec5g
  
• ESC: Skyartec 12A
  
• Battery: Skyartec 7.4V 900mAh Lithium Li-Po
  
• Transmitter: SKY702 7CH 2.4G
  
• Receiver: 7CH 2.4G
  
• Radio Control Range: 2500 feet (762m)

• 1 x Skyartec WASP V3 6-CH 3D RC RTF Helicopter (Brushless Motor / Plastic Rotor Head & Tail) Package
• 1 x 2.4G Transmitter
• 1 x 12A Brushless Speed Controller
• 1 x 4500kv Brushless Motor
• 1 x 7.4V 900mah Battery
• 1 x Li-Po Balance Charger

** customer is recommended to purchase spare parts together with the helicopter to save waiting time and shipping cost because spare parts are needed from time to time.