This is the 3K Carbon Fiber (FULL CARBON) version of H250 PRO frame which was designed to have more mounting options for Flight Controller, GPS and other gears. 3K Carbon Fiber is one of the best Carbon material commonly used in RC Hobby, it is better than Carbon Fiber Composite material.
FPV & Camera Mount
You can put your mini camera (eg. 808 Car Key) on the top and mount the 5.8G FPV Camera in front of the Quad.
Easier to install and loose the screw
Improved design to let you easier to install and loose the screw.
Bottom Panel Mounting
You can also mount 45mm, 35mm, 30.5mm and 30mm Flight Controller on the bottom panel while other H250 frames allow you to mount one 45mm FC only. The spacer is light weight Aluminum made.
Motor Mounting Option
Both M2 and M3 holes are available for motors. eg. 1306/1804/1806 motors usually use M2 while 2204/2206 motors usually use M3. This makes your life easier without having to make a M3 hole by yourself when you use 2204/2206 motor because other H250 frames usually ship with M2 option only.
- Various mounting patterns for flight controller which you can mount 30x30mm, 30.5x30.5mm, 35x35mm or 45x45mm are all available.
- Very flexibility mounting patterns for flight controller, GPS, Camera and 5.8Ghz, etc..
- Both M2 and M3 screw holes for motors from 1804 (M2) to 2206 (M3).
- Material: 3K Carbon Fiber (100% Full Carbon Panel)
- Spacer Material: Aluminum
- Panel Thickness
- Arm: Approx 3mm
- Other: Approx 1.5mm - 1.7mm
- Net Weight:
- Approx. 100g (all CF panels)
- Approx. 129g (after assembled without Skid)
- Approx. 134g (after assembled with Skid)
- Approx. 374g (built with KK 2.1, H2206 Motor, 5030 Props, 12A ESC, Skid)
- 1 x RCX H250CF PRO 3K FPV Quadcopter (3K Carbon Fiber / Barebone Frame)
- 1 x Flight Controller (select from option list)
- 4 x Brushless ESC (select from option list)
- 4 x Brushless Motor (select from option list)
- 1 x Power Distribution Board
- 8 x Pair (CW & CCW) GemFan 6045 2-Blade Propeller (for 3S Li-Po Battery Setup)
Extra Items You May Need For The Build (to be purchased separately)
** Availability of this package also depends on the availability of each individual item listed above.
** Only items listed above are included in the package. Other extra accessories are excluded (eg. connector, cable, screws, nylon screw, etc.) unless specified on above individual product page. Item is not in "Package Included" means it is not included.
** If you change the motor from the option list, you will also receive *all* CW Prop Mount by default. You need to purchase the suitable CCW Prop mount for the motor you choose separately if you need.
** RCX08-041 and RCX08-057 Tension Damper are suitable for this frame.
Flight Time Test (604g) - H2206 1950KV + 30A ESC + FC6045 + 3S 2200mAh (~15 minutes)
Flight Time Test (597g) - H2206 1950KV + 30A ESC + GF5030 + 3S 2200mAh (~14 minutes)
Flight Time Test (557g) - H2206 1950KV + 12A ESC + GF5030 + 3S 2200mAh (~14 minutes)