This is the new RCX H2214 950KV Motor to be released in Nov 2014 for DJI Phantom & V2 or Similar Multirotor Copters (around 1kg - 1.5kg of flying weight)
. It is designed to replace DJI 2212 Motor and TM MN2214 Motor while quality is still maintained at a bargain price.
It assembled with Imported NMB Bearing and Copper Wire to maintain the quality. The motor has been balanced by Motion Balancing
Machine so you will see the colored balancing mud in the motor. There are lots of brands who claimed their motors are balanced but in fact it is only static balanced (this means just to filter the highly imbalanced CNC out), its balancing quality is far away from real Dynamic Balancing. If you do not see the balancing mud inside almost all motors, that means their "balanced" word is just a joke. Be Smart & Buy Smart! Dynamic balancing is the most time consuming part when manufacturing a motor so factories don't like to balance the motors due to saving of labor work. RCX always cannot catch up the supply demand due to this reason (production quantity is limited by the balancing work). If a factory can supply heaps of motors to the market, do you think their motors are balanced well? If RCX does not need to balance the motor, the production would be much faster.
The flight test below shows approx. 18 minutes of hover time using 9443 and 4400mAh which is very good if you compare to DJI 2212 and MN2214 motors. Especially if you compare the price, you cannot beat RCX.
Standard 5mm Propeller Mount
By default. H2214 shipped with DJI Style Prop Mount. But we made this Standard Prop Mount for customers do prefer to use standard propeller. It is not included by default so you can click here
to purchase it separately.
With both 16mm and 19mm mounting options in M3 screw size, it will fit most frames in the market.
- Model: RCX H2214-2
- KV: 950KV
- Configuration: 12N14P
- ldle Current: 0.62A @ 10V
- Internal Resistance: 0.139Ω
- Propeller Mount: DJI 8mm Style Propeller Mount
- Shaft Diameter: 4mm
- Bearing: NMB
- Cable Length: Approx 20cm
- Approx 60g with long cables
- Approx 65g with long cables and Prop Mount installed.
- Suitable ESC: 12-30A (it depends on the Prop you use)
- Suitable Battery: 3-4S Li-Po
- Suitable Propeller:
- 8055 T-Type Propeller (can be directly installed by two 3mm screws because it has 4mm motor shaft)
- 8045 DJI Propeller - 3S or 4S LiPo
- 9443 / 9045 / 9047 DJI Propeller - 3S LiPo
- 1045 DJI Propeller - 3S LiPo
Bearing and motor shaft are common consumable parts of a motor. You are recommended to replace a new one from time to time after a period of flight time. Replacement of bearings and motor shaft could sometime fix mirror issues. It is better for you to keep some for spare.
- 1 x RCX H2214 950KV Multirotor Brushless Motor (DJI Style)
- 1 x Set of Prop Mount (CW - Clockwise)
** Please balance the propeller before flight. Unbalanced prop causes vibration more serious than the motor.
H2214 950KV + 1045 Prop + 4400mAh 3S - Approx 19 minutes hover time (1.2kg flying weight)
H2214 950KV + 9443 Nylon Prop + 4400mAh 3S - Approx 18 minutes hover time (1.2kg flying weight)
H2214 950KV + 8045 Prop + 4400mAh 3S - Approx 16 minutes hover time (1.2kg flying weight)