RCX07-253 : RCX H1306 2300KV Micro Outrunner Brushless Motor (Performance Racing) [RCX07-253] Review - USD9.99 : MyRcMart.COM : This mini motor is suitable for 200-230 frame (multicopter). High quality NMB bearings are selected together with imported copper. The CNC Motor Case is manufactured by the same factory of a famous brand (the name start with S*******, it is a kind of insect) because we know the accuracy is very important for mini motor and we mean to make quality motor. It is priced to sell low to beat our competitors. It is the same class compared to MT1306 but in much affordable pricing (why pay more? while you can pay less). It assembled with Imported NMB Bearing and Copper Wire to maintain the quality. The motor has been balanced by Motion Balancing Machine so you will see the colored balancing mud in the motor. There are lots of brands who claimed their motors are balanced but in fact it is only static balanced (this means just to filter the highly imbalanced CNC out), its balancing quality is far away from real Dynamic Balancing. If you do not see the balancing mud inside almost all motors, that means their "balanced" word is just a joke. Be Smart & Buy Smart! Dynamic balancing is the most time consuming part when manufacturing a motor so factories don't like to balance the motors due to saving of labor work. RCX always cannot catch up the supply demand due to this reason (production quantity is limited by the balancing work). If a factory can supply heaps of motors to the market, do you think their motors are balanced well? If RCX does not need to balance the motor, the production would be much faster. Mini Motor Best For 150-230 frames. Very tiny motor with quality CNC Manufacturing. Neat copper wire winding This H1306 motor made with Imported Copper Wire, NMB Bearings, Kawasaki Japan 0.2mm Silicon Steel. You compare with other 1306 motors (eg. DY** / RCT**** who claimed their motors have been balanced) in the market to see if you find such colored balancing mud. If not, that means they are not as good as RCX H1306 we sell here. 5mm Prop Shaft - Directly Install With RCX 5030 Prop 5mm Prop Shaft with Special Anti-Slip Pattern H1306 shipped with 5mm prop shaft with special designed pattern to lock up the prop even better. Long & Soft AWG Motor Cables Soldered with about 15mm long AWG Soft Cables which you can cut it shorter to the length you prefer. You can use M5 Slip-Resistant Hex Locknut if you prefer Motor Diagram Thrust Test Table This 2300KV motor is suitable for those who use 3S with 5030 and 4S with 4045 Propeller. Specification Model: 1306-2 KV: 2300KV Configuration: 9N12P Prop Shaft Diameter: 5mm (best suitable for 5mm prop, no adapter is required) Stator Diameter: 13mm Stator Length: 6mm Shaft Diameter: 2mm Motor Dimensions: Φ17.7×15mm ldle Current: 0.33A (@10V) Internal Resistance: 0.548Ω Weight: Approx 14g (included bullet Prop Locknut and long AWG cable) Approx 13.2g (included long AWG cable but without bullet Prop Locknut) Cable Length (3 Cables for ESC): Approx 15mm Suitable ESC: 10A Suitable Battery: 2-3S Li-Po Battery 7.4V - 11.1V (recommend 11.1V 3S Lipo for better performance) 3S is good if you use it with 5030 Prop Maintenance Parts Bearing and main shaft are common consumable parts of a motor. You are recommended to replace a new one from time to time after a period of flight time. RCX07-293 - Brushless Motor Bearing (Φ2*Φ5*2.5mm / NMB) RCX07-434 Motor Shaft (Ф2*17.15mm) for H1306 *V2* Motor M5 Slip-Resistant Hex Locknut (if you prefer) Loctite 638 Retaining Compound - use it if the motor shaft is loosed from CNC or when you change motor shaft Package Included 1 x RCX 1306-2 2300KV Micro Outrunner Brushless Motor 4 x Screws ** Notice: Motor is not exchangeable/refundable if the motor cables are cut (shorten) or motor has apparently damage. So if you want to test the motors to make sure the motors are working properly, we suggest you to use "Terminal Blocks" for connection between motor and ESC for testing. Thank you for your kind attention. Videos

RCX H1306 2300KV Micro Outrunner Brushless Motor (Performance Racing)

Details

Manufacturer:	RCXHOBBY.COM
Model:	RCX07-253
Weight:	30g
Remark:	Maximize Performance for 5030(3S) & 4045(4S)
Availability:	Time is unforeseen
Price:	~~USD11.99~~ USD9.99 Save 17% Off

Available Options:
Warranty:

More Details | Video Proof of Working

This mini motor is suitable for 200-230 frame (multicopter). High quality NMB bearings are selected together with imported copper. The CNC Motor Case is manufactured by the same factory of a famous brand (the name start with S*******, it is a kind of insect) because we know the accuracy is very important for mini motor and we mean to make quality motor. It is priced to sell low to beat our competitors. It is the same class compared to MT1306 but in much affordable pricing (why pay more? while you can pay less).

It assembled with Imported NMB Bearing and Copper Wire to maintain the quality. The motor has been balanced by Motion Balancing Machine so you will see the colored balancing mud in the motor. There are lots of brands who claimed their motors are balanced but in fact it is only static balanced (this means just to filter the highly imbalanced CNC out), its balancing quality is far away from real Dynamic Balancing. If you do not see the balancing mud inside almost all motors, that means their "balanced" word is just a joke. Be Smart & Buy Smart! Dynamic balancing is the most time consuming part when manufacturing a motor so factories don't like to balance the motors due to saving of labor work. RCX always cannot catch up the supply demand due to this reason (production quantity is limited by the balancing work). If a factory can supply heaps of motors to the market, do you think their motors are balanced well? If RCX does not need to balance the motor, the production would be much faster.

Mini Motor Best For 150-230 frames.

Very tiny motor with quality CNC Manufacturing.

Neat copper wire winding
This H1306 motor made with Imported Copper Wire, NMB Bearings, Kawasaki Japan 0.2mm Silicon Steel. You compare with other 1306 motors (eg. DY** / RCT**** who claimed their motors have been balanced) in the market to see if you find such colored balancing mud. If not, that means they are not as good as RCX H1306 we sell here.

5mm Prop Shaft - Directly Install With RCX 5030 Prop

5mm Prop Shaft with Special Anti-Slip Pattern
H1306 shipped with 5mm prop shaft with special designed pattern to lock up the prop even better.

Long & Soft AWG Motor Cables
Soldered with about 15mm long AWG Soft Cables which you can cut it shorter to the length you prefer.

You can use M5 Slip-Resistant Hex Locknut if you prefer

Motor Diagram

Thrust Test Table
This 2300KV motor is suitable for those who use 3S with 5030 and 4S with 4045 Propeller.

Specification

Model: 1306-2
KV: 2300KV
Configuration: 9N12P
Prop Shaft Diameter: 5mm (best suitable for 5mm prop, no adapter is required)
Stator Diameter: 13mm
Stator Length: 6mm
Shaft Diameter: 2mm
Motor Dimensions: Φ17.7×15mm
ldle Current: 0.33A (@10V)
Internal Resistance: 0.548Ω
Weight:

Approx 14g (included bullet Prop Locknut and long AWG cable)

Approx 13.2g (included long AWG cable but without bullet Prop Locknut)

Cable Length (3 Cables for ESC): Approx 15mm
Suitable ESC: 10A
Suitable Battery: 2-3S Li-Po Battery 7.4V - 11.1V (recommend 11.1V 3S Lipo for better performance)

3S is good if you use it with 5030 Prop

Maintenance Parts
Bearing and main shaft are common consumable parts of a motor. You are recommended to replace a new one from time to time after a period of flight time.

RCX07-293 - Brushless Motor Bearing (Φ2*Φ5*2.5mm / NMB)
RCX07-434 Motor Shaft (Ф2*17.15mm) for H1306 *V2* Motor
M5 Slip-Resistant Hex Locknut (if you prefer)
Loctite 638 Retaining Compound - use it if the motor shaft is loosed from CNC or when you change motor shaft

Package Included

1 x RCX 1306-2 2300KV Micro Outrunner Brushless Motor
4 x Screws

** Notice: Motor is not exchangeable/refundable if the motor cables are cut (shorten) or motor has apparently damage. So if you want to test the motors to make sure the motors are working properly, we suggest you to use "Terminal Blocks" for connection between motor and ESC for testing. Thank you for your kind attention.

Videos

More Images

Current Reviews: 3

This product was added to our catalog on Monday 23 April, 2018.
** product specification may vary from time to time and photo(s) is for illustration only

Customers who bought this product also purchased

Aluminium CNC7075 Screw (M3*6 / 10pcs / Green)	Aluminium CNC7075 Screw (M3*10 / 10pcs / Green)	Hex Locknuts M3 (Slip-Resistant / Aluminium / Purple / 10pcs)
Nylon Pillar Hex Spacer (Single Flat Head / Black / M2x8+6mm / 20pcs)	Mini WS2812B RGB LED_Strip & Buzzer Controllable via CleanFlight & BetaFlight (Naze32/F3/F4)	L-C Filter Super Micro for Micro Multirotor (1-4S / 1A Current / 0.2g)