RCX03-061 : RC Lost Model Alarm (Finder/Tracker) for Plane/Glider/Helicopter [RCX03-061] Review - USD3.99 : MyRcMart.COM : Features With this device, you can locate or find your lost plane/helicopter easily Within the effective range for that tracker can over 50M Simply turn off your TX, the tracer will start to scream ( just like the engines sound from the real airplane) Follow the lead and you can find your beloved plane Specification Weight: app. 4.7g Operating Voltage : 4-6 volts DC Low Current consumption : < 35 mA (1 mA at standby mode) Alert Level : 85dB Can be heard in 50 meter distance Suitable Controller: AM/FM PPM, FM/PCM Operation Connect the lost alarm between the servo (the one which runs when flying) and the receiver, i.e. act as a servo extension cord Turn on your transmitter Turn on your receiver then you will hear two beep sound To test if it is functioning: Do not move any of the control stick on the transmitter for 1 min. or simply turn it off You will hear a continuous beep sound after 1 minute If you cannot find you plane, do not move the control stick or turn off your transmitter for 1 min for the alarm sound By the tracking sound, you will be able to locate your RC plane / Helicopter Can be connected to any kinds of servo Package includes: 1 x R/C Lost Model Alarm (Finder/Tracker) for Plane/Glider/Helicopter Video in Action

RC Lost Model Alarm (Finder/Tracker) for Plane/Glider/Helicopter

Details

Manufacturer:	RCX-HOBBY
Model:	RCX03-061
Shipping Weight:	20g
Availability:	Usually ship within 48 hours (Estimated)
Price:	~~USD4.99~~ USD3.99 Save 21% Off

More Details

Features

With this device, you can locate or find your lost plane/helicopter easily
Within the effective range for that tracker can over 50M
Simply turn off your TX, the tracer will start to scream ( just like the engines sound from the real airplane)
Follow the lead and you can find your beloved plane

Specification

Operation

Connect the lost alarm between the servo (the one which runs when flying) and the receiver, i.e. act as a servo extension cord
Turn on your transmitter
Turn on your receiver then you will hear two beep sound
To test if it is functioning:

Do not move any of the control stick on the transmitter for 1 min. or simply turn it off
You will hear a continuous beep sound after 1 minute

If you cannot find you plane, do not move the control stick or turn off your transmitter for 1 min for the alarm sound
By the tracking sound, you will be able to locate your RC plane / Helicopter
Can be connected to any kinds of servo

Package includes:

Video in Action

More Images

This product was added to our catalog on Monday 21 May, 2012.
** product specification may vary according to manufacturer

Customers who bought this product also purchased

XT60 Harness for 2 Packs in Parallel (5CM / 12AWG)	XT60 Harness for 2 Packs in Series (5CM / 12AWG)	Grub Screw M3x4 (10pcs)
RCX Canopy Nut (Black / 10pcs / 3.0mm Hole / 450 Canopy)	RCX-450CG-013 - Main Shaft Holder	RCX-450CG-014 - Damper Rubber