This is a H Style QuadCopter with Simple Design and Construction. This package includes Barebone, Motor, ESC, Propellers (Value Combo).







Don't miss it.

• High Quality Glass Fiber Base Frame
  
• Made by advanced engineering material, super strong and smooth.
  

• Frame Diagonal Wheelbase: 450mm
• Frame Weight: Approx. 300g
• Flying Weight: 850g-1650g
• ESC: Your Own Choice
• Motor: Your Own Choice
• Propeller: 10x4.5 (3S Li-Po) OR 8x4.5 (4S Li-Po)
• Screw Driver: 3.0mm Hex Wrench 

• 1 x H-450Q QuadCopter (V1 / Barebone)
• 1 x Pair 1045 DJI Style Propellers (Black / CW & CCW) - RCX01-180
• 1 x Pair 1045 DJI Style Propellers (Orange or Green / CW & CCW) - RCX01-182 / RCX01-181
• 4 x RCX H2214 CW 950KV - RCX07-266 (CW)
• You may purchase CCW Prop Mount separately if you need.
  
• 4 x RCX ESC (please choose from option list)
  
• 1 x KK 2.1 Flight Controller - RCX03-527
• 1 x 5V/12V UBEC - RCX07-313

** Availability of this package also depends on the availability of each individual item listed above.
** Only items listed above are included in the package. Other extra accessories are excluded (eg. connector, cable, screws, nylon screw, etc.) unless specified on above individual product page. Item is not in "Package Included" means it is not included.
** If you change the motor from the option list, you will also receive *all* CW Prop Mount by default. You need to purchase the suitable CCW Prop mount for the motor you choose separately if you need.

Extra Items You May Need For The Build (to be purchased separately)

• RCX03-634 - Nylon Screw M3x5mm
  
• RCX03-635 - Nylon Screw M3x6mm
  
• RCX03-640 - Nylon Spacer M3x8mm
  
• RCX03-644 - Nylon Spacer M3x5+6mm
  
• RCX03-342 - 10CM Servo Cable (For RX & FC) - you may need 4-5pcs
  
• RCX03-680 - Nylon XT-60 Cable Connector (Connect the Power Distribution Board)
  
• RCX03-671 - RCX Screw M3x8 - If you are using H2214 Motor
• RCX03-083 - RCX Battery Strap (5pcs / 20x300mm)
• RCX07-313 - RCX UBEC 3A (2-6S LiPo / Ouput 5V or 12V Switchable) - You may need if you have LED or FPV Gear
  

** Landing Skid is excluded in this package, but you may purchase it separately here. You might need extra work (drill the holes on the quad bottom panel) when you install the skid because the holes might not match (please do not purchase this skid if you do mind). This is an easy job if you have the electric screw driver (We believe most of you have one in the garage).

Beginner Build Tutorial with KK 2.1.5


H2214 950KV + 1045 Prop + 4400mAh 3S - Approx 19 minutes hover time (1.2kg flying weight)


H2214 950KV + 9443 Nylon Prop + 4400mAh 3S - Approx 18 minutes hover time (1.2kg flying weight)


H2214 950KV + 8045 Prop + 4400mAh 3S - Approx 16 minutes hover time (1.2kg flying weight)