RCX03-391 : GT Power FPV 5.8G 250mW A/V Transmitting Module (TX) [RCX03-391] Review - USD9.99 : MyRcMart.COM : GT Power FPV 5.8G 250mW A/V Transmitting Module (TX) Features -- Specification Video Format: Pal/NTSC Output impedance: 50 Ohm Output power: 21-23 dBm Channels: 8 Transmitter operating voltage: 7.4-12.6 V DC/200mA Video bandwidth: 0-8.0 MHZ Audio input impedance: 10K/Ohm Audio input level: 0.5-2.0 Vp-p Audio frequency: 6.5 MHZ Antenna connector: SMA Video input level: 0.8-1.2 Vp-p Video input impedance: 75 Ohm Dimensions: 55x26x17 mm Weight: 25g Package includes: 1 x Transmitting Unit 1 x Set of Cable Wire ** Note: TX antenna must be installed properly before it is switched on, power on without antenna installed, or an improper antenna was used may easily burn the VTX, and such damage is not covered by warranty. The antenna helps the VTX to reduce heat so using an improper antenna will burn/damage the VTX easily. ** Warning: Any customized work (eg. you remove the default RP-SMA/SMA connector and solder a thin antenna on the VTX. This might cause overheat and burn the IC) on the VTX by yourself will void the factory warranty (no warranty, replacement and refund will be offered). ** HOT: 5.8Ghz Transmitter is always HOT no matter of which brand because it releases heat during transmission. Without using an proper antenna, it could burn itself in seconds because the heat has no where to release. You are recommended to use an external Heat Sink to help on reducing heat. ** Due to above reasons. Free replacement / refund will not be offered without returning the product. Thank you for your kind attention. ** You may consider to use an external Heat Sink to reduce the heat a bit. Click here to browse all available heat sinks. Video in Action --

GT Power FPV 5.8G 250mW A/V Transmitting Module (TX)

Details

Manufacturer:	GT Power
Model:	RCX03-391
Weight:	10g
Availability:	Time is unforeseen
Price:	~~USD34.99~~ USD9.99 Save 72% Off

More Details | Video Proof of Working

GT Power FPV 5.8G 250mW A/V Transmitting Module (TX)

Features

Specification

Video Format: Pal/NTSC
Output impedance: 50 Ohm
Output power: 21-23 dBm
Channels: 8
Transmitter operating voltage: 7.4-12.6 V DC/200mA
Video bandwidth: 0-8.0 MHZ
Audio input impedance: 10K/Ohm
Audio input level: 0.5-2.0 Vp-p
Audio frequency: 6.5 MHZ
Antenna connector: SMA
Video input level: 0.8-1.2 Vp-p
Video input impedance: 75 Ohm
Dimensions: 55x26x17 mm
Weight: 25g

Package includes:

1 x Transmitting Unit
1 x Set of Cable Wire

** Note: TX antenna must be installed properly before it is switched on, power on without antenna installed, or an improper antenna was used may easily burn the VTX, and such damage is not covered by warranty. The antenna helps the VTX to reduce heat so using an improper antenna will burn/damage the VTX easily.

** Warning: Any customized work (eg. you remove the default RP-SMA/SMA connector and solder a thin antenna on the VTX. This might cause overheat and burn the IC) on the VTX by yourself will void the factory warranty (no warranty, replacement and refund will be offered).

** HOT: 5.8Ghz Transmitter is always HOT no matter of which brand because it releases heat during transmission. Without using an proper antenna, it could burn itself in seconds because the heat has no where to release. You are recommended to use an external Heat Sink to help on reducing heat.

** Due to above reasons. Free replacement / refund will not be offered without returning the product. Thank you for your kind attention.

** You may consider to use an external Heat Sink to reduce the heat a bit. Click here to browse all available heat sinks.

Video in Action

More Images

This product was added to our catalog on Wednesday 25 April, 2018.
** product specification may vary from time to time and photo(s) is for illustration only

Customers who bought this product also purchased

RCX Mini LED Light (45X9mm / 12V / Green)	RCX Canopy for Trex 450 Pro (Glass Fiber)	Canopy Mask (Hand Made / 450 Pro)
RCX Canopy for Trex 450 Pro (Glass Fiber)	RCX Canopy Nut (White / 10pcs / 3.0mm Hole / 450 Canopy)	RCX Mini LED Light (Multi-Color / 12V)