English below was translated from Chinese to English using Google Translator.
Note: CH1 ~ CH3 and 12V OUT of the four ports are shared with at least one device provides 12V power supply.
- 1, Control Input: Receiver.
"S" line for the control signal line receiver, "+" line This device operating voltage 5V (receiver provides it with a 5V supply), "-" line GND.
2, CH1: Video 1 Input, connect the camera 1.
"S" line signal input line for the camera 1, the "+" video line 12V, "-" line GND.
3, CH2: Video 2 Input, connect the camera 2.
"S" line for the camera signal input line 2, the "+" video line 12V, "-" line GND.
4, CH3: Video 3 Input, connect the camera 3.
"S" line for the camera signal input line 3, the "+" video line 12V, "-" line GND.
5, OUT: Video Out, AV IN port to connect the OSD or image transmission transmitter. "S" line for the signal output line, "+" line for all video 12V, "-" line for all video GND.
- 1, all the camera's power can OSD or image transmission transmitter power supply for 12V, 12V power supply can also be external.
- 2, This device operating voltage 5V, 12V do not access the video voltage, otherwise it will burn at once, it can not be repaired.
- 3, This device can access any channel receiver, it is recommended access to third gear knob switch channels or channel to use, so they can take full advantage of the third gear change function; if access to two-way switch channels can only achieve the two-way signal the switching function (CH1 and CH2).
- 4, This device can not only be used as a video switch, it can be used as an electronic ignition, and electronic shutter trigger switch.
- 5, as an electronic ignition, the shutter is triggered and the use of electronic switches, please note that the output current capability, maximum continuous output current capability of 100 mA (Max: 100Ma); if the current range is exceeded, please select YLAVES32 as electronic ignition, shutter trigger and electronic switches and other uses, because YLAVES32 has two switchable output 12V / prefix = st1 ns = "urn: schemas-microsoft-com: office: smarttags" output 1A, specifically to see YLAVES32 user manual.
- Operation Voltage: 5V±0.5V
- Operation Current: 5mm
- Weight: 2g
- Size: 15.5mm*28mm
- 16x44.7x5.6mm (include pins)