Charging Walkera's 3.7V (1 Cell) Battery one by one is time consuming and also a trouble task, isn't it? Here you can charge three 1-Cell Battery at once using an external Balance Charger.

But beware that you need a good balance charger, the best one should be a single processor monitoring each single battery cell, so it will stop charging when a particular cell is full. Bad balance charger may damage the battery.

The Red JST Male connector will then become a 3S Battery. This JST connector is used by some chargers required to discharge the battery during balancing such as iMax B6.

Specification:

• Cable Length: Approx. 5cm
• Cable: AWG 24#
• Connectors:
• 3 x Walkera Micro Battery Connector
  
• 1 x JST Male
• 1 x 3S Charging Connector (the white one)

 

• 1 x 1S To 3S Charging Cable for Walkera Battery (Mini JST)
  

** This item contains Cable ONLY. Battery and Balance Charger are not included.

** Please beware that all joint batteries must be same capacity (same mAh), otherwise it will be dangerous.